DIG Microline™ Dripline

Extremely versatile and flexible, DIG’s 1/4″ Microline Dripline presents key advantages over other irrigation methods, utilizing low-cost, small-diameter dripline that can be used in any part of the garden for a water-efficient drip irrigation system. The dripline’s cylindrical labyrinth drip emitters are inserted into the interior wall of the 1/4” micro tubing every 6″, 9″ or 12″ spacing. It can be installed in a wide range of above-ground application layouts, or used under mulch or bark to conserve water or for aesthetic reasons. The dripline is designed to be extended from the drip tubing or micro tubing using a 1/4″ barb, or attached into our four- or six-outlet drip manifolds. It can be used in planter boxes, vegetable gardens, window boxes, box gardens, looped around individual plants or trees, in narrow paths of planting areas or where total saturation is desired along the drip line path, while eliminating discoloration of fences, windows and walls due to water staining.

Features

• Use for planter boxes, window boxes, closely planted or narrow areas, vegetable gardens, gravity feed systems, green roofs or loop around roses, shrubs and trees
• Connected into any drip system’s drip tubing with ¼” barbed fittings
• Each drip emitter has two outlets for less chance of plugging
• Use for commercial and residential applications
• Allows water to drip directly to the root zone, delivering a constant deep watering
• No special tools or glue are needed
• Can be used in both new and existing landscape areas
• Available in 50’ with 12″ spacing, 100′ with 6″, 9″ and 12″ spacing and 500′ with 12″ spacing
• Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
• Contains UV inhibitors for long life and extended operation in harsh conditions
• Flexible micro tubing for easy installation
• DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)

Technical

Specifications

• Operating pressure range: 10 to 25 PSI
  • Recommended operating pressure: 20 to 25 PSI (use with model D46 25-PSI pressure regulator)
• Flow rate: .65 GPH @ 25 PSI
• Drip emitter spacing: 6", 9" or 12"
• Drip line size: 50’, 100’ or 500' with .170 ID x .250 OD
• Bending radius: minimum 1'
• Two (2) outlets per each drip emitter
• Color: black or brown
• Filter requirement: minimum of 150 mesh
• Material: drip tubing & drip emitters: polyethylene